Home > Water Quality Monitoring > By Product Type > Online Water Quality Monitors > Turbidity > Turbidity Sensor & Meter - Thermo Scientific

Turbidity Sensor & Meter - Thermo Scientific

Turbidity Measurement Range Turbidity measurement range from 0 - 4000 NTU
Multiple Signal Outputs Including Modbus RTU, DeviceNet, Profibus, USB, CANopen, Ethernet.
Low powered Connects to Adcon Telemetry RTUs

Product Options

Quantity Required Date Notes about your application

Case Studies

Ensuring Regulatory Compliance: Hot-swap adaptor allows re-calibration without downtime in remote water quality monitoring for the Aggregates Industry

Overview

The Datastick Turbidity Meter has a range from 0 to 4000 NTU and a resolution of 0.1 NTU. The Wide-Range Datastick turbidity sensor provides a versatile solution for turbidity monitoring programmes. The turbidity sensor has a rugged construction, has anti-fouling characteristics and is extremely chemically resistant. A wide range of plug-and-play connection adapters are available including Modbus RTU, DeviceNet, Profibus, USB, CANopen, Ethernet. The turbidity probe can connect directly to a PLC(Programmable Logic Controller) for seamless integration with industrial control systems. It can also be connected to any computer to display data, calibrate and customise the unit without needing an intermediate analyser box. The onboard electronics are completely encapsulated and O-ring sealed for complete protection from moisture and humidity. An integral temperature sensor measures temperature independently. The turbidity sensor conforms to ISO 7027,

Manufactured by: Thermo Scientific
Model: Turbidity Sensor & Meter - Thermo Scientific

Services offered for this product

Applications

Drinking water
- Raw water monitoring
- Back wash monitoring
Wastewater effluent
Process clarity monitoring

Measurement System Performance†
Range	0 to 4000 NTU
Resolution	0.1 NTU
Accuracy	1% of reading
Step Response Time	90% in 15 seconds
Operational Environment
Temperature Range	-5 °C to 50 °C
Maximum Pressure	65 psig @ 50 °C
Maximum Flow Rate	10 ft/second
Power Requirements‡
Voltage Range	10 to 30 VDC
Maximum Power	200 mW
Typical Power	120 mW
Construction
Windows	Quartz
Optical Topology	Detection at 90 degrees and 180 degrees to source
O-rings	Viton®
Sensor Head Material	Polycarbonate
Weight	1.2 lbs
Units of Measure
Turbidity Mode	NTU
Temperature Units	°C, °F

Calibration††
Sample	1 and 2 point
Zero	1 point
Temperature	1 point
Measurement Modes
Turbidity	90 degree/180 degree, narrow beam, IR light
Temperature	Automatic from -5 °C to 50 °C
Other Configuration Options
Sensor Filter	0 to 100 seconds
Temperature Filter	0 to 100 seconds
Approvals and Ratings
Immunity & Emissions	CE Certified 89/336/EEC: CISPER 11, EN61000 (-4-2,-4-3,-4-4,-4-6, 4 8)
Safety	cULus Listed; 367G E303570
Hazardous Locations	Haz Loc Class 1, Division 2, Groups A, B, C, D. T5 Max Ambient 50 °C
† Note: Typical at 25 °C Performance unaffected by cable length ‡ Note: Class II DC power supply required †† Note: Turbidity and Temperature are precalibrated at the factory

Turbidity Sensor & Meter - Thermo Scientific

Case Studies

Overview

Services offered for this product

Applications

Specification

Related products